Table of Contents
Advertisement
Switching on or off
You can only switch on the Night View As-
sist if
the SmartKey in the starter switch is
set to position 2
it is dark
the light switch is set to * or B
or if the daytime driving lamps are
switched on
the automatic transmission is not in
position R
1 Night View Assist on or off
Press button 1.
The Night View Assist image appears
on the multifunction display.
i
The infrared headlamps only come on above
a speed of approx. 9 mph (15 km/h). Therefore,
when you are at a standstill, you do not have a
complete view and cannot check the function of
the Night View Assist.
Image on multifunction display
When you switch on Night View Assist, the
image for the speed gauge changes on the
multifunction display. The speed gauge is
shown as a bar on the lower edge of the
multifunction display. The line for main
menus is no longer available. If you would
like to change a setting using the steering
wheel buttons, you must first switch off
Night View Assist.
Controls in detail
Driving systems
1 Night View Assist image
2 Speedometer display
i
If you change the brightness of the instru-
ment cluster while Night View Assist is switched
on, only the brightness of the multifunction dis-
play is changed.
421
Advertisement
Table of Contents
