Table of Contents
Advertisement
Changing setting: Rotate
select desired function.
Saving setting and exit the menu:
Press n.
Bluetooth settings
General information about Bluetooth
Bluetooth technology is the standard for
short-range wireless data transmission of
up to approximately 10 meters. Bluetooth
can be used to exchange vCards or make
calls using a headset.
Activate or deactivate Bluetooth
Select "Vehicle"
"System Settings"
"Services"
"Deactivate Blue-
tooth".
You have activated or deactivated Blue-
tooth. A checkmark appears when
Bluetooth is deactivated.
ymz
and
Connecting Bluetooth devices
i
To connect a Bluetooth device, the Blue-
tooth function must be activated in COMAND
and in the device concerned. The Bluetooth de-
vice must also be set to "visible" or "findable" in
order for COMAND to find and display it. For the
setting procedures, please see the operating in-
structions for the Bluetooth device.
It is possible to establish a Bluetooth con-
nection between COMAND and the follow-
ing types of device:
Mobile phone (only for transferring
business cards)
Headset
Laptop/PDA
You can connect up to twelve devices to
COMAND but only one device can be ac-
tive at a time.
The connection process includes search-
ing for the device and its subsequent au-
thorization.
Control systems
COMAND system settings
Calling up the Bluetooth device list and
searching for devices
Calling up the list: Select "Vehicle"
"System Settings"
"Services"
"Search for Bluetooth devices".
When you call up the list for the first
time after switching on COMAND, the
search for devices in the reception
range starts automatically. You will see
a display to this effect.
The device list appears after a short
while.
Canceling search:
Select "Cancel".
The second time you call up the list, and
each time thereafter, the device list ap-
pears immediately if COMAND has not
been switched off and on again in the
meantime.
Starting search manually:
select "Update".
217
Advertisement
Table of Contents
