Table of Contents
Advertisement
Main category list with input characters
When this list appears, the input charac-
ters 5 are automatically activated.
1 Top list entry based on the input data
up to that point
2 Characters entered by the user
3 Characters automatically added by the
system
4 Symbol for available POIs or other
available subcategories
5 Input characters
6 Currently non-selectable characters
7 Currently selectable character
8 Currently selected character
9 Main category list
COMAND navigation system (Point of interest entry)
i
In the list of input characters 5, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.
While the characters are being selected as
described below, the top list entry 1 al-
ways shows the category which best corre-
sponds to the input data as it has been
entered up to that point.
At the same time, COMAND automatically
supplements characters 2 entered by the
user with appropriate characters 3.
Selecting characters: Slide
rotate ymz.
Confirming character selection:
Press n.
Deleting individual characters:
Select ) in the bottom line and
press n.
Deleting an entire entry: Select ) in
the bottom line and press n until the
entire entry is deleted.
Canceling an entry: Select "Back" in
the bottom line and press n.
or
Press back button L in the center
console ( page 80).
As soon as COMAND can clearly attribute
the characters entered to a category, the
input characters 5 disappear.
You see the list of main categories without
the input characters. Here you can confirm
the current entry or make another selec-
tion.
You can also manually switch to the main
omp
or
category list without input characters at
any time.
Switching manually to the main cat-
egory list without input characters:
Slide qm.
or
Select ? in the second line from the
bottom and press n.
Control systems
179
Advertisement
Table of Contents
