Table of Contents
Advertisement
The memory button and stored position
buttons are located on the entry side of
each front seat base.
M
Memory button
1, 2, 3
Stored positions
Switch on the ignition ( page 39).
or
Open the respective door.
Storing positions into memory
Adjust the seats ( page 44).
On the driver's side, additionally adjust
the steering wheel ( page 46) and
exterior rear view mirrors ( page 48)
to the desired positions.
Press memory button M.
Release memory button M and press
stored position 1, 2 or 3 within
3 seconds.
All settings are stored to the selected
position.
Controls in detail
Memory function*
Recalling positions from memory
!
Do not operate the power seats using mem-
ory button M if the seat backrest is in an exces-
sively reclined position. Doing so could cause
damage to front or rear seats.
Move seat backrest to an upright position first.
Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
i
Releasing the stored position button stops
movement to the stored positions immediately.
145
Advertisement
Table of Contents
