Table of Contents
Advertisement
Folding second-row seats
!
When the second-row seats are folded
forward, the front seats may not be moved to the
rearmost position. Otherwise you could damage
the front and second-row seats.
Move the seat to be folded to its rear-
most position ( page 138).
Remove the rear center console*, if so
equipped ( page 323).
i
The rear center console* can remain
installed, if installed in the most forward position
( page 325). However, the cargo compartment
floor will then not be an even plane.
The storage compartment and the cupholders in
the rear center console* are only illuminated,
when the rear center console* is installed in the
most rearward position (position 0)
( page 325).
Remove the head restraint from the
respective second-row seat
( page 141).
1 Seat backrest
2 Seat cushion
3 Release lever
Place the head restraint on the seat
cushion.
Relieve the load on seat backrest 1
and pull release lever 3 past the
resistance point in direction of arrow
as far as it will go.
Seat and seat backrest are unlocked.
Controls in detail
Fold seat backrest 1 forward until it
fully rests on seat cushion 2 in a
horizontal position.
1 Seat backrest
2 Seat cushion
Push down on folded seat backrest 1
until seat cushion 2 engages in seat
base.
Loading
303
Advertisement
Table of Contents
