Controls in detail
Loading
Loosening the partition net
Belt hook attached in the second-row
footwell
1 Buckle
2 Belt hook
3 Cargo tie-down ring
Loosen the tightening belt by pulling
buckle 1 upward in direction of arrow.
Remove belt hook 2 from cargo
tie-down ring 3.
310
Removing and storing the partition net
Take partition net bar 2 out of
holder 1, see "Installing the partition
net" ( page 309).
Press the red button on the upper and
lower partition net bar.
Fold the partition net.
Roll up the partition net.
Close the zipper on partition net
package.