Table of Contents
Advertisement
Low beam and high beam flasher spot
bulbs
Warning!
Do not remove the low beam/high beam
cover for the Bi-Xenon* headlamp. Because
of high voltage in Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.
Front turn signal lamp bulbs
Pull bulb socket 1 out of the head-
lamp housing.
Pull the turn signal bulb out of bulb
socket 1.
Insert the new turn signal bulb into bulb
socket 1.
Insert bulb socket 1 into the head-
lamp housing.
Parking and standing lamp bulbs
G
1 Bulb socket for parking and standing
lamp
Turn bulb socket 1 counterclockwise.
Pull bulb socket 1 out of the housing.
Pull the bulb out of bulb socket 1.
Insert the new parking and standing
lamp bulb into bulb socket 1.
Insert bulb socket 1 into the housing.
Turn bulb socket 1 clockwise until it
engages.
Practical hints
Replacing bulbs
Corner-illuminating front fog lamp*
bulbs
Example illustration (except R 63 AMG)
1 Corner-illuminating front fog lamp*
2 Cover
3 Retaining screw
489
Advertisement
Table of Contents
