Table of Contents
Advertisement
Practical hints
Jump starting
Connect positive terminals 2 and 4
with the jumper cable. Clamp cable to
charged battery 4 first.
Start engine of the vehicle with the
charged battery and run at idle speed.
Connect negative terminals 1 and 3
of the batteries with the jumper cable.
Clamp cable to charged battery 3
first.
!
Never invert the terminal connections!
Start the engine of the disabled vehi-
cle.
516
You can now turn on the electrical con-
sumers. Do not switch on the headlamps
under any circumstances.
Remove the jumper cables first from
negative terminals 1 and 3 and then
from the positive terminals 2 and 4.
You can now switch on the headlamps.
Have the battery checked at the
nearest authorized Mercedes-Benz
Light Truck Center.
Advertisement
Table of Contents
