Table of Contents
Advertisement
Display symbol
Display message
n
*
Vehicle rising
wait briefly
Compressor
cooling down
Level selection
not permitted
!
When the message Compressor cooling
down appears in the multifunction display, driv-
ing is still possible.
Possible cause/consequence
The vehicle level is too low.
Level control was activated too long/too
frequently.
You are driving too fast for the desired
level selection.
Keep in mind that the ride height of the vehicle is
not yet reached and you could therefore damage
the underbody of the vehicle.
The selected level will be set once the compres-
sor has cooled down.
Practical hints
What to do if ...
Possible solution
Do not drive off.
The vehicle level control* has not yet
adjusted the vehicle level to the nec-
essary height required for driving.
Wait until the message disappears
from the multifunction display.
You may then drive off.
Let the compressor cool until the
message disappears.
The selected level will be set once the
compressor has cooled down.
Reduce vehicle speed.
Set the next higher level
( page 287).
471
Advertisement
Table of Contents
