Table of Contents
Advertisement
Installation of infant and child restraint
system
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seat backrests.
1 Anchorage ring cover
Remove anchorage ring cover 1 from
seat backrest of the seat on which a
child seat is to be installed.
2 Anchorage rings
3 Hook
Move the respective head restraint to
its uppermost position ( page 139).
Release the respective seat backrest
( page 133).
The seat backrest folds down.
Safety and Security
Occupant safety
2 Anchorage ring
3 Hook
4 Top tether strap
Guide top tether strap 4 between
head restraint and top of seat backrest.
i
For safety, make sure hook 3 has attached
to anchorage ring 2 beyond the safety catch, as
illustrated ( page 95).
95
Advertisement
Table of Contents
