Table of Contents
Advertisement
Fully opening the door windows
(Express-open)
Press switch 1, 2, 3, or 6
( page 251) past the resistance point
and release.
The corresponding door window opens
completely.
Fully closing the door windows
(Express-close)
Pull switch 1, 2, 3, or 6
( page 251) past the resistance point
and release.
The corresponding door window closes
completely.
Warning!
Driver's door only:
If within 5 seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not function.
If the upward movement of a door window
is blocked during the closing procedure,
the door window will stop and open
slightly.
Remove the obstruction.
Pull the respective power window
switch past the resistance point again
and release.
i
If the door window still does not close when
there is no obstruction, pull and hold the respec-
tive power window switch. The door window will
then close without the obstruction sensor
function.
Stopping door windows during
Express-operation
Press or pull the respective door
G
window switch again.
Controls in detail
Power windows
Hinged quarter windows*
The switches for opening and closing the
hinged quarter windows are located on the
door control panel of the driver's door
( page 36).
1 Hinged quarter windows: opening
2 Hinged quarter windows: closing
253
Advertisement
Table of Contents
