Table of Contents
Advertisement
Manual Accuracy
We are proud to provide a high-quality owner's
manual with your new machine!
We made every effort to be exact with the instruc-
tions, specifications, drawings, and photographs
in this manual. Sometimes we make mistakes, but
our policy of continuous improvement also means
that sometimes the machine you receive is
slightly different than shown in the manual.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused or unsure about something, check our
website for an updated version. We post current
manuals and manual updates for free on our web-
site at www.grizzly.com.
Alternatively, you can call our Technical Support
for help. Before calling, make sure you write down
the Manufacture Date and Serial Number from
the machine ID label (see below). This information
is required for us to provide proper tech support,
and it helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
-2-
INTRODUCTION
Contact Info
We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number and manufacture date from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Machine Description
The Model G0700 is designed as an alternative
option to a traditional cabinet saw. This saw is
capable of both through and non-through cutting
operations, similar to a traditional cabinet saw, but
has a sliding table available to assist with cross-
cuts or angled cuts that would otherwise require a
jig or crosscut sled to cut safely.
A scoring blade is included with the Model G0700.
It may or may not be used, depending on if the
workpiece is faced with laminate, melamine, or
other solid surface material, or if tear-out free cuts
are required. If the scoring blade is not needed
for cutting operations, it can be lowered under the
table so it will stay sharp for later operations.
In order to produce accurate results, the slid-
ing table must move parallel to the blade and
the scoring blade must be aligned with the main
blade.
Model G0700 (Mfd. Since 5/14)
Advertisement
Table of Contents
