Blade Requirements
The riving knife included with this machine is
0.090" (2.3mm) thick and is only designed for 10"
diameter blades.
When choosing a main blade, make sure the
blade size meets the requirements listed below.
The thickness of the blade body and teeth can be
measured with calipers or any precision measur-
ing device.
Blade Size Requirements:
•
Body Thickness: 0.079"–0.090"
(2.0mm–2.3mm)
•
Kerf
(Tooth)
Thickness:
(3.1mm–3.3mm)
-32-
This section on blade selection is by no means
comprehensive. Always follow the saw blade
manufacturer's recommendations to ensure safe
and efficient operation of your table saw.
Ripping Blade Features:
•
•
•
•
0.122"–0.129"
Blade Selection
Best for cutting with the grain
20-40 teeth
Flat-top ground tooth profile
Large gullets for large chip removal
Figure 37. Ripping blade.
Model G0700 (Mfd. Since 5/14)
Flat
Top
Blade