Fisher & Paykel OB30 Series User Manual page 53

Alert code Possible causes
The oven has overheated.
Door lock error: the door cannot
A
be locked after you have started a
Self Clean cycle.
Door lock error: the door cannot
A3
be unlocked after a Self Clean
cycle has finished.
Technical fault.
F +
+ number
Alert codes
What to do
Allow the oven to cool down.
1
Once the oven has cooled down and
2
the door has unlocked, the alert code
will disappear. You can now use the
oven again.
Turn the power to the oven off at the
1
wall and on again.
Wait approximately 10 seconds. This is
2
to allow the door lock to return to its
initial position.
Set the clock. See 'Setting the clock
3
and first use' for instructions.
Try starting a Self Clean cycle again,
4
making sure that you close the door
firmly. See 'Using the Self Clean
function' .
Turn the power to the oven off at the
1
wall and on again.
Try pressing on the oven door to help
2
the door lock disengage.
If this doesn't help and the alert
3
code reappears, call your Authorized
Repairer or Customer Care.
Note down the alert code.
1
Wait until the cooling fans have
2
stopped and the oven has completely
cooled down.
Turn the power to the oven off at the
3
wall.
Call your Authorized Repairer or
4
Customer Care with the alert code
information.
51