Fisher & Paykel OB30 Series User Manual page 33

F U N
Press the right scroll
4a
and the meat probe indicator will come
on and the display will show
Press the select
4b
The display will then flash
Press select to confirm:
6
the meat probe indicator will remain on
the display will alternate between the set
temperature and the internal temperture
of the meat.
Tips for using the meat probe
You can still use the timer when the meat probe is in use.
You cannot use the meat probe with Automatic cooking.
The internal temperature of the meat will continue to rise by 35-45°F / 2-8°C after you have
removed it from the oven, so allow for this in your calculations. Cover with foil and let it rest for
15 to 20 minutes.
If you wish to remove the meat from the oven (eg basting), unplug the meat probe from the
socket but do not remove it from the meat. The display will show -- . When you are ready to
resume cooking, re-insert the probe plug into the socket and the display will will alternate
between the preset and current internal temperature of the meat.
Important!
-
+ +
Use only the meat probe supplied with your oven, purchased from your Fisher & Paykel dealer or
replaced under warranty by your nearest Fisher & Paykel Authorized Repairer.
Hold the meat probe at the handle when inserting and removing it from food and the meat probe
socket.
Remember to remove the meat probe from the oven before you start a self-clean cycle.
Do not store the probe in the oven.
Only use the probe with fully defrosted food.
Wash the meat probe in mild soapy water but do not immerse. It is NOT dishwasher safe.
+
C T O I N
button 4 times
148.
button to confirm.
148
.
E T M P R E T A U E R
Using the meat probe
Use the scroll
5
required meat temperature (eg 167
75 C).
o
To cancel the meat probe at any stage
Press and hold the cancel
the display returns to the time of day.
When the preset temperature is reached:
7a
a tone will sound every 15 seconds
the oven will turn off
the display will show time of day.
Press the cancel button to cancel the
7b
tone.
31
buttons to set the
F /
o
button until