Yaesu FT-450/D Technical Supplement

HF/50 MHz TRANSCEIVER
FT-450/D
Technical Supplement
©2011 VERTEX STANDARD CO., LTD.
Introduction
This manual provides technical information necessary
for servicing the FT-450/D HF/50 MHz Transceiver.
Servicing this equipment requires expertise in handling sur-
face-mount chip components. Attempts by non-qualified per-
sons to service this equipment may result in permanent
damage not covered by the warranty, and may be illegal in
some countries.
Two PCB layout diagrams are provided for each double-
sided circuit board in the Transceiver. Each side of is re-
ferred to by the type of the majority of components in-
stalled on that side ("leaded" or "chip-only"). In most
cases one side has only chip components, and the other
has either a mixture of both chip and leaded components
(trimmers, coils, electrolytic capacitors, ICs, etc.), or lead-
ed components only.
While we believe the technical information in this manu-
al to be correct, VERTEX STANDARD assumes no liabili-
ty for damage that may occur as a result of typographi-
cal or other errors that may be present. Your cooperation
in pointing out any inconsistencies in the technical infor-
mation would be appreciated.
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
VERTEX STANDARD ( AUSTRALIA ) PTY., LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
EH024H90D
Specifications
Exploded View & Miscellaneous Parts
Block Diagram
Connection Diagram
Alignment
Board Unit (Schematics, Layouts & Parts)
RF-IF Unit
Panel Unit
Cntl Unit
Pa Unit
TUNER Unit (FT-450 Option:ATU-450 )
FT-450
FT-450D

Contents