Memory Operation; Convenient Memory Functions - Yaesu FT-450D Operation Manual

M
EMORY
The FT-450D contains 500 regular memories, labeled "MEM-001" through "MEM-500", two Home channels,
one for the HF band and another for the 50 MHz band, two special programmed limit memory pairs, labeled
"MEM-P1L/MEM-P1U" and "MEM-P2L/MEM-P2U", one QMB (Quick Memory Bank) memory, one Alaska Emer-
gency Frequency Channel (5167.5 kHz), and five 60-meter (5 MHz) band channels (US version only). and seven
60-meter (5 MHz) band channels (UK version only). Each (except the Alaska Emergency Frequency Channel
and 60-meter Band channels, which are fixed.) stores various settings, in addition to the frequency and mode
(See below). By default, the 500 regular memories are contained in one group; however, they can be arranged
in up to 10 separate groups, if desired.
Quick Point:
The FT-450D's memory channels store the following data:
Ì Operating Frequency
Ì Operating Mode
Ì NARROW / WIDE FM bandwidth status
Ì ATT status
Ì IPO status
Ì CONTOUR status and its Peak Frequency
Ì DSP Noise Reduction (DNR) status and its Reduction algorithm selection.
Ì DSP Notch filter (NOTCH) status
Ì Repeater Shift Direction
Ì CTCSS Tone Frequency
I N :
MPORTANT OTE
On a rare occasion the memory data may be lost or corrupted due to static electricity, electrical noise or errone-
ous operation. Parts changes or repairs may cause memory loss. Be sure to write down or record your data so
you will be able to restore it.
R M
EGULAR EMORY
MEM-003
MEM-002
MEM-001
QMB M C
EMORY HANNEL
QMB
Page 58
O
PERATION
C
ONVENIENT
C (500 ch)
HANNELS
MEM-500
MEM-499
MEM-498
(1 ch)
M
EMORY FUNCTIONS
60- (5 MH ) B
METER Z AND
60- (5 MH ) B
METER Z AND
PMS M C
EMORY HANNELS
(2 ch)
US5-002
(UK5-FB)
US5-001
(UK5-FA)
FT-450D O
C (5 ch) : U.S. V
HANNELS ERSION ONLY
C (7 ch): U.K. V
HANNELS ERSION ONLY
(UK5-FM)
(UK5-FE)
US5-005
(UK5-FL)
US5-004
(UK5-FK)
US5-003
(UK5-FC)
M
PERATION ANUAL