Dsp Microphone Equalizer - Yaesu FT-450D Operation Manual

SSB/AM M
You may select one of ten available DSP equalization techniques for transmitted microphone audio.
1. Press and hold the [ DSP ] button for one second.
This instantly activates menu item "MIC EQ". The
" " icon will appear on the display.
2. Press the [ DSP/SEL ] knob to enable adjustment of
this menu item. The "
3. Rotate the [ DSP/SEL ] knob to select the desired
equalizer pattern.
Observe the relative equalizer pattern on the dis-
play.
(You may press the [ RCL/HOME ] button to reset
the equalizer pattern to the factory default.)
4. Press the [ DSP/SEL ] knob. The "
turns to appear continuously.
5. Press and hold the [ F ] button for one second to save
the new setting and return to normal operation.
The available selections are:
0: Flat
1: Low-frequency components are reduced.
2: Mid-frequency components are reduced.
3: High-frequency components are reduced.
4: High-frequency components are enhanced.
5: Mid-frequency components are enhanced.
6: Low-frequency components are enhanced.
7: Low-frequency components are enhanced
and High-frequency components are re-
duced.
8: Low-frequency components are reduced and
Mid-frequency components are enhanced.
9: Low-frequency components are reduced and
High-frequency components are enhanced
Page 40
T
ODE RANSMISSION
DSP M
ICROPHONE
" icon will be blinking.
" icon re-
E
QUALIZER
[ DSP ] button
[ DSP/SEL ] knob
FT-450D O
[ RCL/HOME ] button
[ F ] button
M
PERATION ANUAL