Power supply blank
Remove the blank.
To replace the component, reverse the removal procedure.
AC power supply
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Access the product rear panel.
3.
Remove the power supply.
4.
WARNING:
power supply blank to cool before touching it.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the power supply or
Removal and replacement procedures 31