CAUTION:
To avoid thermal shutdown, all fans must be installed in a dual processor
configuration.
To remove the processor:
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 26).
3.
Remove the access panel
4.
Remove the heatsink ("Heatsink" on page 45).
5.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
6.
bracket.
("Access
panel" on page 29).
Removal and replacement procedures 48