Power Supply Blank; Hot-Plug Power Supply - HP ProLiant ML350 Maintenance And Service Manual

Power supply blank

Remove the blank from the bay.
To replace the component, reverse the removal procedure.

Hot-plug power supply

WARNING: To reduce the risk of electric shock, do not disassemble the power supply or
attempt to repair it. Replace it only with the specified spare part.
CAUTION: Do not attempt to remove and replace a power supply as a hot-plug procedure unless both
bays are populated with power supplies.
To remove the component:
Disconnect the power cord from the AC source.
1.
Disconnect the power cord from the power supply.
2.
Removal and replacement procedures 31