Cleaning The Evaporator Filter And Evaporator - Asko T884XLHP Operating Instructions Manual

CARE AND CLEANING
CLEANING THE EVAPORATOR FILTER
AND EVAPORATOR
Clean the evaporator and the evaporator filter at the
intervals shown on the machine's display or more often.
1. Turn off the Main power switch and open the outer
door.
2. Remove the plinth.
3. Open the heat pump door.
4. Pull out the filter by lightly pressing the filter support
downwards.
5. Remove the sponge filter (B) from the filter support
(A). Clean it with a vacuum cleaner and wash it under
running water.
A
RECOMMENDATION:
Wash the sponge filter in the washing machine after 30
drying cycles (use the rinse or quick wash program).
6. Clean the heat pump ribs by spraying water on them
(use a plant sprayer). The water will carry away the
lint and the condensate pump will drain the lint and
water mixture.
7. Replace the clean sponge filter into the filter support.
To replace the support, first insert the bottom edge of
the support under an angle, and then lightly press it
towards the heat pump ribs to align it. Close the heat
pump door.
NOTE:
Do not touch the heat pump ribs. They are very thin
an easily damaged. If the ribs are bent or damaged,
the efficiency of the condenser unit will deteriorate
considerably, which in turn leads to poorer drying
results.
B
15