Table of Contents
Advertisement
Care and maintenance instructions
Cleaning the lint filter
The lint filter must be cleaned after each load.
1. Lift the filter from the holder in the door.
2. Open the lint filter. Use your thumb to press
on the edge as illustrated and pull it out.
14
3. Use your hand or a soft cloth to remove the
lint from all sides of the filter. If necessary,
use a damp sponge and a small amount of
washing-up liquid dish soap to remove any
deposits. Dry the filter thoroughly with a
towel.
4. Close the lint filter and put it back in the door.
Close the lint filter before closing the door.
Cleaning the outside of the machine
Clean the outside of the machine and the
program panel with a mild cleaner. Do not use
solvents, as these can damage the machine. Do
not hose down or spray the machine with water.
NOTE!
Do not allow dust to accumulate around the
machine. Keep the area around the tumble
dryer clean and cool; dust, heat, and moisture
prolong drying times.
Customer Care Center
1-800-898-1879
www.askona.com
Advertisement
Table of Contents
