Follow These Instructions - Asko T884XLHP Operating Instructions Manual

DOOR HANGING
You can choose whether the door is hung on the right or
the left.

Follow these instructions:

1. Remove the plinth.
2. Remove the hinge, two screws
3. Lift the door up and remove it. Support the door at
the same time.
4. Remove both door pins (top and bottom). Fit them on
the other side of the machine. Refit the hinge.
5. Loosen and remove the catch (lift up and pull out)
and the cover plate on the door and the machine.
Switch the catch and the cover plate.
1
2
6. Move the plastic plugs on the upper and lower edges
of the door. Use a flat-bladed screwdriver to remove
the plugs.
7. Refit the door by loosening the hinge screws slightly,
affixing the door and closing it. Retighten the hinges.
Replace the plinth.
23