Page 1
Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfi l your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
CONTENTS BEFORE USING YOUR MACHINE FOR THE SETTINGS FIRST TIME You can carry out the following settings Language selection Language Laundry labels Child-safe SAFETY INSTRUCTIONS CARE AND CLEANING General Cleaning the lint fi lter Safety Emptying the condensed water container Installation Cleaning the evaporator fi...
BEFORE USING YOUR MACHINE FOR THE FIRST TIME LANGUAGE SELECTION You will be prompted to select the display language when you have connected your machine and start it for the fi rst time. Do as follows: 1. Turn the programme selector to choose from: US English, English, Svenska, Dansk, Norsk, Suomi, Français, Deutsch, Italiano, Espanol, Русский, Nederlands.
SAFETY INSTRUCTIONS T T T INSTRUCT GENERAL SAFETY Read the operating instructions and keep • The machine must not be used for drying items that them in a safe place! have been dry-cleaned at home or fabrics that may contain residues of fl ammable liquids. •...
Page 5
SAFETY INSTRUCTIONS T T T INSTRUCT To minimize the risk of fi re in a tumble dryer, Vented dryers the following should be observed: • There has to be adequate ventilation to avoid the • Items that have been spotted or soaked with back fl...
SAFETY INSTRUCTIONS T T T INSTRUCT CHILD SAFETY WARNING! DO NOT ALLOW CHILDREN TO PLAY WITH THE TUMBLE DRYER. • If the door is opened when a programme is running the garments may be very hot, with a risk of burn injuries.
DESCRIPTION OF THE TUMBLE DRYER F THE 1. Main power switch 5. Lint fi lter 2. Condensed water container 6. Outer door 3. Panel 7. Steamer and fi lter 4. Serial Number...
ADVICE AND TIPS BEFORE YOU TUMBLE-DRY S BEF Here are some tips that may help you before you begin STATIC ELECTRICITY tumble-drying. To reduce the risk of static electricity in the laundry after tumble drying you can: HAVE THE CLOTHES BEEN SPUN? •...
TUMBLE DRYING YING Below are step-by-step instructions to help you achieve Press the main power switch until the display lights. the best possible tumble-drying results. Open the door, load the items and then close the door. NOTE! SORT YOUR FABRICS Make sure that objects e.g.
TUMBLE DRYING YING Select the program time by pressing the + and - buttons. Anti crease A program time between 30 minutes and 3 hours can be This option means that the drum will rotate for three selected and each button press changes the time by 15 seconds per minute for two hours after the drying minutes.
TUMBLE DRYING YING DRYING PROGRAMME FINISHED Delayed Start The text Done appears on the display when the First select which programme you want to use and programme is fi nished. If the Anti crease option has then select Delayed Start by pressing the + button. The been selected, the drum will rotate for three seconds per display shows Delayed Start in whole hours.
TUMBLE DRYING YING PROGRAMME CHART Here we present the energy and time consumption of a few diff erent programmes. The table shows the eff ect of using diff erent spin speeds when washing the load. Consumption can vary depending on room temperature, humidity, load, variations in the power supply and selected options.
SETTINGS YOU CAN CARRY OUT THE FOLLOWING SETTINGS • Language • Child-safe You will be prompted to select the display language when you have connected your machine and start it for the fi rst time. LANGUAGE Do as follows: 1. Turn off the machine using the main power switch. 2.
CARE AND CLEANING CLEANING 4. Close the lint fi lter and put it back in the door.Close CLEANING THE LINT FILTER the lint fi lter before closing the door. The lint fi lter must be cleaned after each load. 1. Lift the fi lter from the holder in the door. EMPTYING THE CONDENSED WATER CONTAINER 2.
CARE AND CLEANING CLEANING CLEANING THE EVAPORATOR FILTER AND EVAPORATOR Clean the evaporator and the evaporator fi lter at the intervals shown on the machine’s display or more often. 1. Turn off the Main power switch and open the outer door.
CARE AND CLEANING CLEANING CLEANING THE AUTO FILTER CLEANING THE OUTSIDE OF THE MACHINE Clean the fi lter at the intervals shown on the machine’s display or more often Clean the outside of the machine and the programme panel with a mild cleaner. Do not use solvents, as these 1.
TROUBLESHOOTING OOTING ERROR MESSAGES NOTE! • If Over Flow appears on the display, the condensed When starting the tumble dryer for the fi rst time or water container is full or the evaporator fi lter is after a long period without use, you may notice a slight blocked.
TECHNICAL INFORMATION NFORMA TECHNICAL DATA Height: 850 mm Width: 595 mm Depth: 745 mm Weight (net): 61 kg Cylinder volume: 145 l Max. drying capacity: 10 kg Speed: 50-55 rpm Rated power: See type plate. Drum material: Stainless steel Outer casing material: Powder-coated and hot-galvanized sheet steel or stainless steel Setup: Stacking or freestanding...
SERVICE BEFORE CONTACTING THE SERVICE DIVISION See the Troubleshooting and Care and cleaning chapters to see whether you can rectify the problem. If you need to contact the service division, make sure that you know the model designation, type designation and serial number.The model designation (1) can be found on the fi...
INSTALLATION How to assemble the stack: WARNING! 1. Undo the screw on the back of the ASKO washing Do not start the machine until it has been in position for machine as shown in the fi gure. 24 hours. If for some reason the tumble dryer needs to be laid down for transport or service, it must be laid on its left side viewed from the front.
Page 21
INSTALLATION 5. Fasten or undo the rear feet of the appliance until it is fully level, either on the fl oor or on the washing machine. CONDENSED WATER The machine is supplied as shown in Option 1 (inset). This means that the condensed water is pumped into the condensed water container, which must be removed and 6.
DOOR HANGING GING 1. Hinge pins (top and bottom) 4. Locking hook 2. Cover plate 5. Hinges (left + right side) 3. Plastic plugs (on the upper and lower edges) 6. Plinth...
Page 23
DOOR HANGING GING You can choose whether the door is hung on the right or the left. Follow these instructions: 1. Remove the plinth. 2. Remove the hinge, two screws 3. Lift the door up and remove it. Support the door at the same time.
The text End appears on the display when the programme is fi nished. Clean the lint fi lter after each load. Turn off the main power switch. Close the door. We reserve the right to make changes. www.asko.com TD80.2 HP T884XLHP AU/NZ en (11-15)