Panasonic MICRO-IMAGECHECKER AX40 User Manual page 182

Setting Display Methods of the Quoted Data:
If you want to choose whether to output the quoted data and the created titles to the external device or
not in RUN mode, follow the instructions below.
1. Highlight the cell in which the quoted data are.
The subwindow is displayed.
2. Select "Display".
3. Choose "Yes" to output the quoted data. If you do not want to output the
quoted data to the external device, choose "No".
The display setting of the quoted data is displayed at the upper right of the table.
• If you want to select whether to display data monitor in RUN mode or not, select
"ENVIRONMENT" > "RUN mode Image Settings" from menu bar. Refer to page 196 for
details of the display settings.
• Up to eight of digits can be displayed. The asterisk marks are shown for the greater value
than eight digits. Even in such a case, the values are properly output to the external device.
• The data cells that are set to "Not Display" are displayed blank.
Confirming the Output of Each Data and the Settings of Display
You can check the current output and display settings of the quoted data. The output and display settings
of the highlighted data appear in the upper right area of the table.
Settings Item YES
Output Output
Display Display
174
NO
Not Output
Not Display