GE ApexPro Service Manual page 58

Service interfaces
Diagnostics tab
Link name
Device Master
Download ApexPro
Logfiles
Hardware
Install Check
Network
Receiver Subsystem
Transmitters
View ApexPro Logfiles
View Logfiles
Logout
4-10
NOTE
Diagnostics tab features and functionality will vary depending upon your
installation.
The following links are found on the Diagnostics tab.
Used to view VTXP, VRTP and AP statistics.
This function may not apply to your system. See the separate service or configuration documentation for your
specific ApexPro installation for more information about your specific Telemetry System.
Used to download the following logs:
System Logs, ApexPro system log files or Dr. Watson log files.
Telestat Logs, telemetry statistics (telestat) log files).
Used to view current operation status of the following hardware:
Fans. See Fans on page 6-10.
Power. See Power on page 6-10.
Temperatures. See Temperature on page 6-10.
Used to retrieve and check a configuration snapshot of all ApexPro telemetry towers on the network, including
the following sections of information:
Telemetry Check Results
Telemetry System Configuration and Status
See Perform installation check on page 5-16.
Used to display the following network information:
Adaptors, includes the MAC address, IP address, submask, DHCP and status of the ATS IX, MC and RX
adaptors, and also the network computer name and Windows domain information.
adaptor and serial port information on page 6-11.
Unity, includes Unity network information (identical to listwhat -l).
page 6-12.
Used with the ApexPro Channelized Telemetry System to perform network-wide receiver subsystem
diagnostics. The following functions are available:
Blink Bed to blink a receiver card associated with a currently admitted bed.
Blink Rack to blink a receiver subsystem attached to a particular tower.
Blink Receiver to blink a receiver card in a receiver subsystem.
Used to generate a transmitter status summary page for all ApexPro transmitters admitted on the network. This
list can be sorted in multiple ways.
on page 5-13.
Used to view ApexPro system logs or Dr. Watson logs.
Used to search the Webmin log for actions by user, module, and time.
page 6-23.
Used to log user out of Webmin.
ApexPro™ Telemetry
Description
See Device Master statistics on page 6-13.
See Download Telestat logs on page 6-25.
See Configure the Transmitter battery status report for viewing and printing
See View ApexPro log files on page 6-22.
See Download system logs on page 6-24.
See Adaptors - Display
See Unity Network device detection on
See Blink bed on page 6-18.
See Blink rack on page 6-19.
See Blink receiver on page 6-20.
See View log files - Webmin activity on
2001989-203C