Ricoh Pro C7100 User Manual page 50

5. Adding Paper and Toner
Tray 1 can hold 8
representative.
• When paper loaded in the right side of Tray 1 runs out, paper on the left is automatically shifted to
the right. Do not pull out Tray 1 while the tray is moving paper; wait until sounds stop coming from
the tray.
• If Tray 1 is closed too quickly, the paper in the tray may force the right tray's side fence to slip out
of place. If the paper misfeeds because of this, open the tray, adjust the fence, and close the tray
slowly.
• For the right stack, align the right edge of the paper with the right edge of the tray. For the left
stack, align the left edge of the paper to the left edge of the tray.
1. Carefully pull out the paper tray until it stops.
2. Square the paper and load it print side down.
Do not stack paper over the limit mark.
• Whole tray pulled out
• Left half of the tray pulled out
48
1
/ × 11 paper only. If you want to print on A4 from Tray 1, contact your service
2
DER055
DER056