Ricoh Pro C7100 User Manual page 111

Problem
Cannot print in duplex
mode.
The machine does not turn
off in 13 minutes after the
main power is turned off.
An error has occurred when
the Address Book is
changed from the display
panel or Web Image
Monitor.
Paper is bent.
The print image is not
properly positioned on the
paper.
Cause
You have selected a paper
type that cannot be used for
duplex printing.
The machine cannot perform
the shutdown procedure.
The Address Book cannot be
changed while you delete
the multiple stored
documents.
Paper may be bent when it is
ejected from the finisher
upper tray.
• The machine has not
detected the paper
type and/or width
correctly.
• The print position is not
aligned properly.
When You Have Problems Operating the Machine
Solution
In "Tray Paper Settings", select a paper
type that can be used for duplex
printing. For details about setting
"Paper Type", see "Tray Paper
Settings", Paper Settings.
Repeat the shutdown procedure. If the
machine does not turn off, turn off the
AC power switch.
Wait a while, and then retry the
operation.
Change the output tray to the finisher
shift tray.
Contact the machine administrator or
your service representative.
109