Ricoh Pro C7100 User Manual page 105

The following table explains problems that cause the indicator lamp for the [Check Status] key to light or
flash.
Problem
Documents and reports do
not print out.
Documents and reports do
not print out.
An error has occurred.
The machine is unable to
connect to the network.
When the Indicator Lamp for the [Check Status] Key Is Lit or Flashing
Cause
The paper output tray is full.
There is no paper left.
A function which has the
status "Error Occurred" in
the [Check Status] screen is
defective.
A network error has
occurred.
Solution
Remove the prints from the tray.
Load paper. For details about loading
paper, see "Loading Paper", Paper
Specifications and Adding Paper.
Press [Check], read the displayed
message, and then take the
appropriate action. For details about
error messages and their solutions, see
"When Messages Appear",
Troubleshooting.
• Check that the machine is
correctly connected to the
network and that the machine is
correctly set. For details about
how to connect the network, see
"Interface Settings", Connecting
the Machine/ System Settings.
• For details about connecting to
the network, contact your
administrator.
• If the indicator lamp is still lit even
after you try to solve the problem
as described here, contact your
service representative.
103