Ricoh Pro C7100 User Manual page 120

6. Troubleshooting
Message
"The selected paper size is
not supported. This job has
been cancelled."
"The selected paper type is
not supported. This job has
been cancelled."
"Z-fold error."
When there is a problem with the print settings
Message
"Booklet/Half Fold Error"
"Classification Code is
incorrect."
"Classification Code is
incorrect."
118
Cause
Job reset is automatically
performed if the specified
paper size is incorrect.
Job reset is automatically
performed if the specified
paper type is incorrect.
Z-folding was canceled.
Cause
The job was canceled because
you specified invalid settings for
saddle stitching or half fold.
The classification code has not
been entered, or the
classification code has been
entered incorrectly.
The classification code is not
supported with the printer
driver.
Solution
Specify the correct paper size, and
then print the file again.
Specify the correct paper type, and
then print the file again.
Check the tray, paper orientation, print
orientation, and Z-fold settings again.
Solution
Check the settings for saddle
stitching or half fold.
Enter the correct classification
code.
Select [Optional] for
classification code. For details
about how to specify
classification code settings, see
"Configuring Classification
Codes", Print.