Ricoh Pro C7100 User Manual page 100

5. Adding Paper and Toner
Machine: Maintenance
For details about the following items, see "Machine: Maintenance", Paper Settings.
No.
0505 Fusing Belt Smoothing
Setting
0506 Smooth Fusing Belt
0509 Temperature / Humidity
inside the Machine
0510 Temperature / Humidity
outside the Machine
0513 Back Up / Restore Custom
Paper Data
0515 Execute Developer
Refreshing
Finishing: Finisher
For details about the following items, see "Finishing: Finisher", Paper Settings.
No.
0601 Adjust Staple Position
Across Feed Direction 1
0602 Adjust Staple Position
Across Feed Direction 2
0603 Adjust Staple Position With
Feed Direction
0607 Adjust Punch Position
Across Feed Direction
0608 Adjust Punch Position With
Feed Direction
0618 Adjust Staple Position for
Booklet
98
Item
Specify whether or not to automatically execute [For
Uneven Gloss (Short Time)] for fusing belt smoothing.
Remove vertical and horizontal lines from printouts.
Display the internal temperature and humidity.
Display the external temperature and humidity.
Back up and restore custom paper profiles.
The machine uses degraded toner in the development
unit and adds new toner from the toner bottle.
Item
Adjust the vertical position of the staple (applied at an
edge) when using Finisher SR5050 or Booklet Finisher
SR5060.
Adjust the vertical position of the staples (dual) when
using Finisher SR5050 or Booklet Finisher SR5060.
Adjust the horizontal position of the staples when using
Finisher SR5050 or Booklet Finisher SR5060.
Adjust the vertical position of the punch holes when using
Finisher SR5050 or Booklet Finisher SR5060.
Adjust the horizontal position of the punch holes when
using Finisher SR5050 or Booklet Finisher SR5060.
Adjust the horizontal position of the booklet staples when
using Booklet Finisher SR5060.
Description
Description