Table of Contents
Advertisement
Serial Port (RS-232) Configuration
The device's built-in bi-directional RS-232 serial interface allows system
control through a high-end controller, PC and / or home automation / home
theater software package.
Configuring the Serial Port
The controller's serial port should be configured as follows:
Description
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Verification
After entering a command, using the instructions on pages 10-15, a
verification message will appear:
• Command OK – indicates that the command is correct and successfully
performed by the switch
• Command incorrect – indicates that the command has the wrong format
and / or values
Setting
19200
8
None
1
None
9
Advertisement
Table of Contents
