Installation - IOGear GHSW8241 User Manual

Installation

Note: Make sure your source devices and display are powered off
before you start.
STEP 1
Connect an HD cable to the output port from the HD switch to the input port
of the HDTV or HD Projector.
STEP 2
Connect any HD media sources to the input ports of the HD switch via HD
cables.
STEP 3 (optional)
Connect your hardware or software RS-232 controller for HD switch control.
STEP 4 (optional)
If you have an IR extension cable (not included), plug it into the IR
Extension port and place it where the IR remote can reach it.
STEP 5
Connect the power adapter to the power jack and into an available wall
outlet.
STEP 5
STEP 1
HD OUTPUT
HD INPUT HD INPUT
STEP 2
7
HD INPUT
STEP 3
IR EXT
STEP 4
Control
proces sor