Copying On Tabs - Muratec MFX-C2280 Copy Manual

Copying on Tabs

Pre-requisites
You will need 8 .5" x 11" Tabs . The Konica Minolta approved tab dividers are the Avery
Dennison 20406 (long edge-only) tabs .
APPLICATION
Customer creates booklets and/or binders and needs to insert printed tabs to separate
chapters or sections .
If not on the Home screen touch the Menu key on the Control Panel
1 . Place the index original on the Original Glass or ADF .
2 . Touch the Copy icon .
3 . Touch Application .
4 . Scroll to No. of Originals section .
5 . Touch Tab Original .
6 . Select ON to Copy
an index original (Tab) .
7 . Select 8 .5" x 11" as
the Paper Size of the
index original (Tab) .
8 . Touch OK .
9 . Touch Close .
10 . Load the tab into the
Bypass Tray (up to 70
sheets can be loaded) .
a . With print side facing
down, align the tabs
facing away from
the engine .
b . Slide the lateral glides to fit against the tab paper .
.
51