Muratec MFX-C2280 User's Manual Print Functions page 148

2.8 Appendix: Manual Installation Process of the Printer Driver
7
Click [Next].
8
Specify the IP address and port.
% Enter "\\NetBIOS-name\print-service-name" in the [Port Name] box.
% For the NetBIOS name and print service name, enter the names displayed by selecting [Utility] - [Ad-
ministrator Settings] - [Network Settings] - [SMB Settings] - [Print Settings] on this machine.
9
Click [Next].
% If the [Additional Port Information Required] dialog box appears, go to Step 10.
% If the [Install the printer driver] dialog box appears, go to Step 13.
10
Select the [Custom] check box, then click [Settings...].
11
Change the settings according to the port, and then click [OK].
12
Click [Next].
The [Install the printer driver] dialog box appears.
13
Click [Have Disk...].
14
Click [Browse...].
15
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select the folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers: PCL driver, PS driver, and XPS driver
16
Click [OK].
The [Printers] list appears.
17
Click [Next].
18
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue] or [Yes].
19
Click [Finish].
20
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] or [Devices and Printers] window.
21
Remove the CD-ROM from the CD-ROM drive.
This completes the installation process of the printer driver.
Printing in the Windows Environment
2
2-135