[Ps Setting]; [Security Settings] - Muratec MFX-C2280 User's Manual Print Functions

Settings
[Font Size]
[Line/Page]
[CR/LF Mapping]

[PS Setting]

To display: [Utility] - [User Settings] - [Printer Settings] - [PS Setting]
Specify the default values for PS printing.
This machine operates according to these settings unless the printer driver specifies the print settings.
Settings
[Print PS Errors]
[ICC Profile Settings]
[Auto Trapping]
[Black Overprint]

[Security Settings]

To display: [Utility] - [User Settings] - [Printer Settings] - [Security Settings]
Select whether to verify the digital signature when printing XPS/OOXML (docx, xlsx, pptx) files with a digital
signature.
Settings
[Verify XPS/OOXML Digital
Signature]
Description of Setup Buttons (User Settings)
Description
Specify the default font size value.
• [Scalable Font]: Enter the font size (in points) for scalable fonts (where
different letters have different widths).
[12.00 point] is specified by default.
• [Bitmap Font]: Enter the font width (in pitches) for bitmap fonts (where
all letters have the same width).
[10.00 pitch] is specified by default.
Enter the number of lines of text data to be printed on one page.
The default values vary depending on the country you are in.
Select whether to replace the line feed codes when printing text data.
When you want to replace the line feed codes, select the replacement
method.
[No] is specified by default.
Description
Select whether to print error information when an error occurs during PS
rasterization.
[OFF] is specified by default.
Specify the default profile setting to be displayed in the printer driver.
Select whether to superimpose neighboring colors to print so as to prevent
white space being generated around a picture.
Selecting [ON] prevents the generation of white lines at the boundaries of
colors in graphs or figures.
[OFF] is specified by default.
Select whether to print so as to prevent white space being generated
around a black character or figure.
• [Text/Figure]: Adjacent portion between a text and figure is overprinted
with black. Use this setting when a white line appears around the black
portion in a graph or figure.
• [Text]: Black is overprinted on the adjacent colors in the text portion.
Use this setting when a white line appears around the text.
• [OFF]: The data is printed as is without overprinting with black.
[OFF] is specified by default.
Description
Select whether to verify the digital signature when printing XPS/OOXML
(docx, xlsx, pptx) files with a digital signature or not.
When [ON] is selected, the data is not printed if the signature is invalid.
[OFF] is specified by default.
6
6-7