Loading Paper Into The Lct (Built-In) - Muratec MFX-C2280 User Manual

6.3

Loading Paper into the LCT (built-in)

6.3 Loading Paper into the LCT (built-in)
Using the LCT (built-in) allows you to load a larger amount of paper than Tray1 to Tray4. It will be convenient
to load the most frequently used paper into the LCT.
0 The LCT (built-in) is an option.
1
Pull out the LCT (built-in) tray.
NOTICE
Be careful not to touch the Film.
2
Load paper into the right side of the LCT (built-in) tray so that
the side to be printed faces up.
% When printing on letterhead (paper where company
names, preset text, and other text or images are already
printed), load it with the print side facing down.
% For details on the available paper sizes, refer to "User's
Guide [About This Machine]/[Checking the Specifications
of Optional Components]".
NOTICE
Do not load so many sheets of paper that the top of the stack
becomes higher than the , mark.
Do not load the LCT (built-in) tray with paper of a size other
than that previously specified. When changing the paper size,
contact your service representative.
If paper is curled, flatten it before loading it.
3
Load paper into the left side of the LCT (built-in) tray so that
the side to be printed faces up.
4
Close the LCT (built-in) tray.
5
When loading paper other than plain paper, change the paper type setting.
% For details, refer to "User's Guide [Copy Operations]/[Description of Setup Buttons]".
Loading Paper
6
6-5