Lcd Setup Functions - CyberPower OLS5200E User Manual

Hide thumbs

Table Of Contents

Table of Contents

LCD INFORMATION READOUT

There are 12 types of UPS information available for display on digit area.

Information Submenu

OUTPUT

XXX V

OUTPUT

XX.XHz

OUTPUT

XXX (k)VA

OUTPUT

XXX% VA

OUTPUT

XXX (k)W

OUTPUT

XXX% W

INPUT

XXX V

EVENT

XXX

ESTIMATED RUN TIME

XX(.)X [Min][Hr]

TIME TO SHUT DOWN

XX(.)X [Min][Hr]

TIME TO TURN ON

XX(.)X [Min][Hr]

LCD SETTINGS CONFIGURATION

There are 8 UPS settings that can be configured by the user.

Press the "ESC" button simultaneously for 5 seconds to activate the setting mode.

The first configuration parameter will be displayed on the LCD screen.

Note: The manual settings programming mode can ONLY be invoked while UPS is in Bypass mode or Standby mode. To

make UPS on Standby mode or Bypass mode, connect utility power to UPS and do not turn on UPS.

Press the "ENTER" button to select the setting you want to configure.

Press the "▼" buttons to scroll through the different parameters.

Press the "ENTER" button to select the parameter you want.

Press the "ESC" button simultaneously for 5 seconds to cancel and exit setting mode. Press the "ENTER" button

simultaneously for 5 seconds to save all the settings you just do and exit setting mode.