Yamaha 2011 WR250FA Owner's Service Manual page 78

GENERAL MAINTENANCE AND LUBRICATION CHART
No. ITEM
12 * Steering bearings
Brake and clutch lever
13
pivot shafts
14 Brake pedal pivot shafts
15 Sidestand pivot
16 * Front fork
Shock absorber assem-
17 *
bly
Rear suspension link piv-
18 *
ots
19 * Control cables
Throttle grip housing and
20 *
cable
21 * Chassis fasteners
22 Battery
• The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
• Hydraulic brake service
• After disassembling the brake master cylinders and calipers, always change the fluid. Regularly
check the brake fluid levels and fill the reservoirs as required.
• Every two years replace the internal components of the brake master cylinders and calipers, and
change the brake fluid.
• Replace the brake hoses every four years and if cracked or damaged.
CHECKS AND MAINTENANCE
JOBS
Check bearing assemblies for loose-
ness.
Moderately repack with lithium-soap-
based grease every 1,200 mi (2,000
km) or 12 months (whichever comes
first).
Apply lithium-soap-based grease (all-
purpose grease) lightly.
Apply lithium-soap-based grease (all-
purpose grease) lightly.
Check operation.
Apply lithium-soap-based grease (all-
purpose grease) lightly.
Check operation and for oil leakage.
Replace if necessary.
Check operation and for oil leakage.
Replace if necessary.
Apply molybdenum disulfide grease
lightly.
Apply Yamaha chain and cable lube or
engine oil 10W-30 thoroughly.
Check operation and free play.
Adjust the throttle cable free play if
necessary.
Lubricate the throttle grip housing and
cable.
Check all chassis fitting and fasteners.
Correct if necessary.
Check terminal for looseness and cor-
rosion.
3-3
INI- ODOMETER
TIAL READINGS
600 mi 1,800 mi 3,000 mi
(1,000 (3,000 (5,000
km) or 1 km) or 3 km) or 6
month months months
√ √ √
√ √ √
√ √ √
√ √ √
√ √
√ √
√ √
√ √ √
√ √ √
√ √ √
√ √