Yamaha 2011 WR250FA Owner's Service Manual page 221

A. For USA and CDN
B. Except for USA and CDN
2. Check:
• Shifter operation
• Transmission operation
Unsmooth operation → Repair.
3. Install:
• Oil strainer "1"
• Bolt (oil strainer) "2"
Bolt (oil strainer):
10 Nm (1.0 m•kg, 7.2 ft•lb)
CRANKCASE AND CRANKSHAFT
4. Apply:
• Sealant
On the right crankcase "1".
YAMAHA Bond No.1215 (Three-
®
Bond No.1215):
90890-85505
Clean the contacting surface of left and right
crankcase before applying the sealant.
5. Install:
• Dowel pin "1"
• O-ring "2"
• Right crankcase
To left crankcase.
• Apply the lithium soap base grease on the O-
ring.
• Fit the right crankcase onto the left crankcase.
Tap lightly on the case with soft hammer.
• When installing the crankcase, the connecting
rod should be positioned at TDC (top dead
center).
6. Tighten:
• Hose guide "1"
• Clutch cable holder "2"
• Bolt (crankcase) "3"
Bolt (crankcase):
12 Nm (1.2 m•kg, 8.7 ft•lb)
5-88