Yamaha 2011 WR250FA Owner's Service Manual page 71

1. Brake master cylinder
2. Brake hose holder
3. Brake hose
A. Install the brake hose so that its pipe por-
tion directs as shown and lightly touches
the projection on the brake caliper.
B. Pass the brake hose into the brake hose
holders.
C. If the brake hose contacts the spring (rear
shock absorber), correct its twist.
D. Install the brake hose so that its pipe por-
tion directs as shown and lightly touches
the projection on the brake master cylinder.
CABLE ROUTING DIAGRAM
2-31