Network disconnect
You can perform the saving/relay/preset operation after receiving an event of a physically
disconnected network.
1. From the Setup menu, select the
<Event (
2. Click <Network disconnect>.
3. Specify the use of "Network
disconnect".
4. Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 94)
5. When done, click [Apply (
SYSTEM SETUP
Product information
1. From the Setup menu, select the
<System (
2. Click <Product information>.
3. Check the camera information, or
provide details according to your
network environment.
• Device name : Provide a device
name that will be displayed on the
Live screen.
• Location : Specify the location where the camera is installed.
• Description : Provide detailed
information about the camera location.
• Memo : Provide an explanation about the camera for better understanding.
• Language : Select a preferred language for the Web Viewer OSD.
M
The default language is set to English.
4. When done, click [Apply (
)> tab.
)> tab.
)].
)].
English _103