To A Dhcp Based Dsl/Cable; Connecting The Camera Directly - Samsung SNP-6200 User Manual

CONNECTING THE CAMERA DIRECTLY TO A DHCP
BASED DSL/CABLE MODEM
Camera
1. Use the cross LAN cable to connect the network cable directly to your PC.
2. Run the IP Installer and change the IP address of the camera so that you can use
the web browser on your desktop to connect to the Internet.
3. Use the Internet browser to connect to the camera.
4. Move to [Setup] page.
5. Move to [Network] – [DDNS] and configure the DDNS settings.
6. Move to [Network] – [Interface], and set the IP type to [DHCP].
7. Connect the camera, which was removed from your PC, directly to the modem.
8. Restart the camera.

M
For registering the DDNS settings, refer to "Registering with DDNS". (page 85)

For configuring the DDNS settings, refer to "DDNS". (page 84)

For setting the IP type, refer to "Interface". (page 83)
INTERNET
DSL/Cable
Modem
DDNS Server
(Data Center, KOREA)
External Remote PC
English _43