Samsung SNP-6200 User Manual page 96

setup screen
❖ Intelligent Video Analysis (VA)
1. Select an Intelligent Video Analysis
mode.
2. Set whether to use the Intelligent Video
Analysis function.
3. Select a type.
• Line/Area/Scene Change : An event
will be tripped if an object passes
through the line, area or full screen
that you specified or if there occurs
an entering/exiting or scene change.
• Appearing/Disappearing : An event
will be tripped if an object appears
or disappears in the line, area or full
screen that you specified.
4. Specify the event rules.
• Minimum Object Size : Set the
minimum size of object for video
recognition.
• Maximum Object Size : Set the
maximum size of object for video
recognition.
• Virtual line based rules : Analyze the
video based on the virtual line.
• Defined area based rules : Analyze the video based on the defined area.
• Entire area based rules : Analyze the video on the entire area.
5. Select the detection sensitivity of a moving object.

Set to a lower sensitivity in environments that allow clear distinguishing of objects from background.
Set to a higher sensitivity otherwise, such as in a dark place.
6. Set whether you want to use the overlay or not.
- If you set it to <Enable>, the event rules will be shown on the screen.
96_ setup screen