Time Schedule - Samsung SNP-6200 User Manual

setup screen
To set defined area based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Appearing/
Disappearing>.
3. Set the event rule to <Defined area
based rules>.
4. Drag and drop to a desired point of the
video.
The selected area by the drag-and-drop method will be set as specified.
5. To cancel your selection, simply click [Clear (
6. When done, click [Apply (

Time schedule

You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.
1. From the Setup menu, select the
<Event (
2. Click <Time schedule>.
To set the timer event
1. Set <Timer event setup> to <Enable>.
2. Specify the <Activation time>.
• Always : Always activates in operated
mode at the set interval.
• Only scheduled time : Periodically
activates in operated mode at a
specified time and date.
3. Specify the <Transfer interval>.
4. Specify the activation conditions.
• FTP sending : Specify the use of the FTP transfer if an event occurs.
• Record : Specify the use of recording if an event occurs.
5. When done, click [Apply (
102_ setup screen
)> tab.
)].
)].
)].