Torque For Fixing Screws; Disposing Of The Scooter - KYMCO Mini S ForU Operating Instructions Manual

19.2 Torque for fixing screws

Front wheel central self-locking bolt
Rear wheel central self-locking bolt
General torque for nuts and bolts:
M5 = 4.5 to 6 Nm
M6 = 8 to 12 Nm
M8 = 18 to 25 Nm
M10 = 30 to 40 Nm
M12 = 50 to 60 Nm

19.3 Disposing of the scooter

The scooter consists of metal and plastic components, electronic
components, electrical cables and batteries.
Disposal of the individual materials must be carried out in accordance
with environmental and disposal regulations in the relevant country, and
may only take place after the scooter has been dismantled.
To dismantle the electromobile and to separate and dispose of the
materials, you would be advised to hand it over to your specialist dealer.
Batteries may not be disposed of in domestic waste, and must be
disposed of according to national regulations
Appendix - tightening torques
= 40 Nm
= 50 Nm
69