Things To Know; The Battery Charger - Functioning Principle; The Batteries - KYMCO Mini S ForU Operating Instructions Manual

12.0 Things to know

12.1 The battery charger - functioning principle

The battery charger regulates the voltage
(Volt) and the current (Ampere) from your
mains connection down to the voltage
required for charging your batteries (24 Volt).
The amount of charging current required is
dependent on the charging state of the
discharged batteries.
Batteries mostly discharged
Batteries half discharged
Batteries completely charged
Since no charging current is flowing when the batteries are full,
the batteries cannot be overcharged.

12.2 The Batteries

The entire power supply is taken over by
two cycle-proof 12 V batteries.
The Scooter is fitted with 22 Ah
(Amp-hour) batteries.
Only enclosed maintenance-free deep cycle
batteries are used.
The batteries located in the removable
battery case beneath the seat.
• The 22 Ah batteries are located in one
battery case
The battery case fitted with 22 Ah batteries
is fitted with its own charging socket. This
means that it is possible to charge the
batteries when separated from the scooter
(Chapter 11.1.2).
42
Things to know
= more charging current
= decreased charging current
= no charging current
22 Ah x 2