ZyXEL Communications P-660R-Tx v2 Series Support Notes page 41

(3) Using Multiple Global IP addresses for clients and servers
(One-to-One, Many-to-One, Server Set mapping types are used)
In this case we have 3 IGAs from the ISP. We have two very busy internal FTP
servers and also an internal general server for the web and mail. In this case,
we want to assign the 3 IGAs by the following way using 4 NAT rules.
•
Rule 1 (One-to-One type) to map the FTP Server 1 with ILA1
(192.168.1.10) to IGA1 (200.0.0.1).
•
Rule 2 (One-to-One type) to map the FTP Server 2 with ILA2
(192.168.1.11) to IGA2 (200.0.0.2).
•
Rule 3 (Many-to-One type) to map the other clients to IGA3 (200.0.0.3).
•
Rule 4 (Server type) to map a web server and mail server with ILA3
(192.168.1.20) to IGA3. Type Server allows us to specify multiple
servers, of different types, to other machines behind NAT on the LAN.
Step 1: In this case, we need to map ILA to more than one IGA, therefore we
must choose the Full Feature option from the NAT field in currently active
remote node, and assign IGA3 to P-660R-Tx v2's WAN IP Address.
All contents copyright © 2006 ZyXEL Communications Corporation.
P-660R-Tx v2 Series Support Notes
41