Receiver Upgrade; Parental Settings; Menu Lock; Guidance - Hitachi HDR5T01 Instruction Manual

Receiver Upgrade

• To ensure that your set top box always has the most
up to date information, you can use this setting. In
order for the proper operation, please ensure that
the box is set to standby mode.
• The STB automatically powers up at 3.00 A.M. every
day and searches for any new software that may
be broadcast. If found, the box will download new
software automatically. This operation will normally
take approximately 30 minutes.
• You can enable or disable automatic upgrade by
setting Automatic Scanning option.
• You can manually search for new software by
selecting Scan for upgrade.
• You can also update your set top box by using the
USB upgrade option.

Parental Settings

• This setting configures menu locking.
• Select Menu Locking option by using " "/" " buttons.
• Press OK button to enter the menu.
• To display parental lock menu options, PIN number
should be entered. Factory default PIN number is 0000.
After coding the correct PIN number, parental settings
menu will be displayed:

Menu Lock

• Menu lock setting enables or disables the menu
access. You can disable access to the installation
menu or the whole menu system.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105

Guidance

Guidance setting enables or disables the menu
access.

Set Pin

• Press OK to display the "Set PIN" window. Use
numeric buttons to enter the new pin number. You
will need to input your new pin a second time for
verification purposes.
• The factory default pin number is 0000. If you change
the pin number make sure you write it down and
keep it safe.

Low Power

If you enable low power option, low power mode will be
activated. In low power mode the power consumption
is less then 0.5W (in standby). If you disable low power
option the power consumption will be high in standby
mode .However the opening time will be shorter and
aerial RF loop_through is operative in stand-by when
the "Low Power" is set to "NO".
Auto Standby
• Press " " or " " button to select Auto Sleep.
Use " " or " " button to set the Auto Sleep to
Disabled, 2 Hours, 4 Hours, 6 Hours or 8 Hours.
• After the timeout value is reached, the box will
switch off.
About
Select About and press OK button to display system
information.

Audio Description

This function enables or disables the audio description
feature by pressing the " " or " " buttons.
Audio description refers to an additional narration
track for blind and visually impaired viewers of
visual media, including television and movies. The
description narrator talks through the presentation,
describing what is happening on the screen during the
natural pauses in the audio (and sometimes during
dialogue, if deemed necessary).You can use this
feature, only if the broadcaster supports that additional
- 21 -